Aeotec Z-Wave Water Sensor 7 Pro
Water Sensor 7 Pro offers leak and flood detection, along with a temperature and humidity sensor built-in. At the first sign of water where it shouldn’t be… or even if water is absent where it should be (such as rain water tanks) – Water Sensor 7 Pro will instantly report back to your Z-Wave Gateway Controller which can then initiate other Z-Wave devices and notifications… from sending alerts to turning off electricity and water valves in order to protect your home from water damage.
Login to view prices
1 Year Warranty
Description
With the Aeotec Water Sensor 7 Pro you are optimally protected against water damage.
Detection of leaks. Leaks can lead to expensive bills and costly damage. The Aeotec Water Sensor 7 Pro not only monitors leaking liquids, but also lives up to its name by also detecting the absence of water. This means that the smart device warns you when the water level in tanks or pits is too low. The Aeotec Water Sensor 7 Pro can also trigger automation routines.
Protection against leaks. The Aeotec Water Sensor 7 Pro doesn’t just monitor leaking water. Once the smart device is connected to your Z-Wave system, the Water Sensor 7 Pro can take action to minimize the damage caused by drips, leaks or burst pipes. For example, in the event of a pipe burst, the Aeotec Water Sensor 7 Pro can instruct the water valves to close automatically.
Heating management. The Aeotec Water Sensor 7 Pro monitors the temperature of your rooms. This precise environmental data can be used to monitor and control a room’s connected heating or cooling systems.
Air quality monitoring. In addition to monitoring the ambient temperature, the Aeotec Water Sensor 7 Pro measures and monitors the relative humidity in your room. The Water Sensor 7 Pro can therefore automatically regulate the air quality in real time, for example by activating extractor hoods or humidifiers and dehumidifiers.
Key Features
- High-accuracy 0.02’’ / 0.5 mm leak detection via spot sensor probe
- Temperature for HVAC, including underfloor heating, control. -20 to 85ºC /-4 to 185°F
- Humidity for ventilation and air-flow automation particularly in wet spaces. ±3% RH (max), 0–80% RH
- Ultra-small form factor: 70x18x19.6mm / 2.76x0.7x0.77”
- Engineered with Gen7 and with 700 series Z-Wave inside
- Gen7 enables compatibility with both Security 2 and SmartStart.
- Pro model uniquely offers 3 space measurement technologies plus leak and drip detection
Compatibility
Click for more information…
Requires Z-Wave Adaptor
Works with Homey
Works with SmartThings
Not Compatible
Not Compatible
Not Compatible
Specifications
- Manufacturer Part #: ZWA019
- Color: White
- Z-Wave Version: 7.12 or later
- Smart Start: Yes
- Repeater: No
- Beaming Capable: No
- Security Supported: S2 Unauthenticated, S2 Authenticated
- Operating distance:
- Approx 164 feet indoors, Up to 492 feet outdoors
- Approx 50 meters indoors / Up to 150 meters outdoors
- Probe Wire Length: 4.9ft (1.5m)
- Dimensions: 2.76 x 0.51 x .79 inches (70 x 13 x 20 mm)
- Relative Humidity Range: 8% to 80%, RH ± 3%
- Temperature Range: -10 to 65°C (± 1°C) / 14 to 149°F, (± 1.8°F)
- Operating Humidity: 10% to 95%
- Operating Temperature: 0°C to 45°C (32°F to 113°F)
- Storage Temperature: -22°F to 158°F (-30°C to 70°C)
- Waterproofing: IP65 rating
- Max Current Consumption: 5mW
- Battery Type: 1/2 AA ER14250 3.6V
- Battery Life: 3 years
- Weight: 42g
