Aeotec Z-Wave Heavy Duty Smart Switch
Aeotec Z-Wave Heavy Duty Smart Switch can switch powered electrical devices and appliances that draw up to 40 amps or 9600 Watts of power. Includes built-in Z-Wave signal repeater and extended Z-Wave wireless range (up to 150m outdoors). Rated IP44 for both outdoor and indoor use.
Login to view prices
1 Year Warranty
Description
Electronics that use up to 40 amps of power.
They’re the big electronics and appliances in your home. Big fridges and pool pumps. Hot water systems and electric car chargers.
If it’s big, if it uses a lot of power, Heavy Duty Smart Switch was made for it.
Key Features
Wireless control.
You have control over everything it is wired to. The Heavy Duty Smart Switch can be controlled via Z-Wave remote controls, apps and gateways if necessary.
Controlling automation.
Electronics do not always have to be switched on, but only when they are needed. The Heavy Duty Smart Switch allows you to automate and schedule the operation of connected heavy-duty devices.
Cost control.
High-power electronic devices tend to be the ones that cost the most money to operate. The Heavy Duty Smart Switch can calculate and report your output in watts and kilowatt hours in real time.
Control in an emergency.
In the event of an emergency, Z-Wave can be used to turn off the connected device. This way you can prevent further damage to electronics and your home.
Indoor switch and outdoor switch.
The Z-Wave Smart Switch can be used both indoors and outdoors. The Heavy Duty Smart Switch was not only made water-resistant for outdoor use. It has also been equipped with all the technology necessary for flawless outdoor operation: a long-range antenna capable of communicating over 150 meters outdoors and a Z-Wave repeater so that it can also do so other Z-Wave devices installed outdoors.
Basic Wiring Diagrams
LOGIN TO VIEW DIAGRAMS
Compatibility
Click for more information…
Requires Z-Wave Adaptor
Works with Homey
Works with SmartThings
Not Compatible
Not Compatible
Not Compatible
Specifications
- Energy Measurement function
- Waterproof Rating: IP44
- Z-Wave Gen5
- Repeater: Yes
- Beaming: Yes
- Power Consumption: 1W
- Ratings:
- 240VAC, 50/60Hz;
- Maximum 9600 Watts 40A Resistor;
- 240VAC 5HP AC Motor;
- Minimum energy sensor reading: 2W
- RF range: 500ft/150m outdoor;
- Endurance of 10ms period peak current of 1440
- Environmental Conditions: Indoor and outdoor use;
- Altitude up to 2000m;
- Operational temperature: 5°C to 40°C;
- Max. relative humidity: 80%;
- Pollution degree 2.
- Product Size/Dimensions: 5.9 x 4.7 x 1.6 inches; 150 x 119 x 41 mm
