Aeotec Z-Wave Door Window Sensor 7 Pro
The Aeotec Door/Window Sensor 7 Pro is a Z-Wave Plus (700 Series) device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 Pro also includes universal “dry contact” terminals allowing you to wire in other external sensors.
Login to view prices
1 Year Warranty
Description
The Aeotec Door Window Sensor 7 Pro is a window sensor that detects exactly whether your window is open, closed or tilted, for which there must be a tilt angle of at least 5°. It can be easily retrofitted to the window. The sensor is simply attached to the sash frame. In addition, a small magnet must be installed near the sensor on the window frame.
With the Aeotec Door Window Sensor 7 Pro you can integrate other binary sensors such as NTC contacts, micro switches or flood sensors into your Z-Wave system. With the potential-free input of the Aeotec Door Window Sensor 7 Pro, it is also possible for the sensor to integrate other sensors into your Z-Wave system, for example. For this purpose, the binary sensors are connected to the potential-free input of the sensor. In addition to sensors, buttons can also be connected at this point, which, for example, start a scene in the Z-Wave center.
Should your Aeotec Door Window Sensor 7 Pro fail you, the heart of it – the circuit board – can be easily replaced without removing the sensor. This means you can stick the device to the window frame and just replace the circuit board.
Key Features
- Aeotec's smallest, full-featured open/close sensor; 40% smaller than Door / Window Sensor Gen5.
- 2 sensors built-in: open/close sensor and tilt sensor.
- Additionally can be used connected 3rd party electronics to your Z-Wave system using the sensor's universal binary input / dry contact sensor.
- Features SmartStart and S2 security technologies.
- Powered by one 1/2 AA (ER14250), Door / Window Sensor 7 uses 66% less battery power to communicate via Z-Wave Plus than older models did. Offers up to 3-year battery life depending on gateway it connects with.
- Uses Z-Wave Plus with Gen7 and 700 series wireless technologies.
Compatibility
Click for more information…
Requires Z-Wave Adaptor
Works with Homey
Works with SmartThings
Not Compatible
Not Compatible
Not Compatible
Specifications
- Name: AEOTEC Door / Window Sensor 7 Pro
- Model number: ZWA012
- Sensors: Magnetic, Tilt Detection: must be over 5 degrees, Dry Contact
- Product Weight: 26 g
- Total Packaging Weight: 73 g
- Product Dimensions: 19 x 71 x 18 g
- Magnet Dimensions: 8 x 20 x 11 mm
- Package Dimensions: 72 x 120 x 32 g
- Water proofing: IP20 rating
- Radio protocol: Z-Wave Plus 2
- Z-Wave hardware: ZGM130S
- Z-Wave Version: 7.12 or later
- Z-Wave Plus Certified: Yes
- S2 Security: Yes
- Smart Start: Yes
- Repeater: No
- Beaming: No
- Power supply: No
- Battery charger input: No
- Battery type: 1 * 1/2 AA ER14250 3.6V rated
- Battery life: 3 years assuming 5 open and 5 close events per day with Wakeup reports disabled.
- Max current consumption: 5mW
- Operating humidity: 10 to 95%
- Operating temperature: -20°C to 45°C, -4°F to 113°F.
- Storage temperature: -30°C to 70°C, -20°F to 158°F
- Operating distance: More than 50 meters indoors / More than 164 feet indoors. Up to 150 meters outdoors / Up to 492 feet outdoors.
